In one paragraph
Liquid cooling solutions is a collective term for the equipment and pipework that move heat away from IT hardware in a data center: CDU vendors supply the coolant distribution unit, pump packages and cold plates are selected as part of the cooling architecture, and a turnkey cooling solution is the overall package assembled by the party named in the project specification. YiJia Cool delivers the custom, non-standard piping and integration solution within that picture: given a drawing we analyse the loop, propose a fit-for-purpose arrangement, manufacture the bespoke stainless piping, rack manifolds and liquid cooling manifolds, integrate the CDU you select into the piping package through interfaces, valve groups, bypasses, supports and connection modules, and support on-site assembly. We are not a CDU vendor and do not manufacture CDU units, pumps, cold plates or quick-disconnect connectors — those are customer-selected items we integrate. Understanding that split is the fastest way to send an RFQ to the right supplier.
We fabricate for projects in the United States and Malaysia. Enquiries, drawings, BOMs and inspection records are handled in English; country-specific standards, units and documentation come from the project specification, not from assumptions about the market.
What a liquid cooling solution is made of
Search results for "liquid cooling solutions" mix together several different things: a component, a piece of equipment, a subsystem and a commercial package. They are frequently quoted, specified and delivered by different parties. Treating them as one line item is the most common reason an enquiry arrives at a pipework fabricator that cannot answer it, or at an equipment vendor that cannot build the spools.
The practical division is by where the coolant is and who commits the drawing. Upstream of the CDU outlet flange, the cooling architecture and equipment selection belong to the design team and its chosen vendors. Downstream of that flange, the coolant is inside the technology cooling system, and the pipework is a custom deliverable controlled by a drawing revision and a BOM. Our work sits in the second group — but it is wider than fabrication alone: custom non-standard pipework, drawing analysis, a proposed piping solution, integrated prefabrication, on-site assembly and CDU liquid cooling piping product integration are all part of what we can take on. The CDU unit itself stays with its vendor: we integrate the customer-selected unit into the piping package, we do not manufacture it.
The supply-scope matrix
The table is deliberately written from a procurement viewpoint. "Typically supplied by" describes a normal project structure, not a claim that YiJia Cool provides that item. Where a project assigns a different party, the project specification takes precedence.
| Term buyers search | Typically supplied by | YiJia Cool's role |
|---|---|---|
| CDU vendors | Equipment manufacturers selected by the design team; the CDU unit is their product, not ours. The CDU separates facility water from the conditioned coolant loop. | CDU liquid cooling piping product integration: we build the chosen CDU into the piping package — outlet-flange interfaces, valve groups, bypasses, supports and connection modules. We are not a CDU vendor and do not manufacture the unit. See the loop boundary guide. |
| Turnkey cooling solutions | The party named in the project specification as responsible for the overall package — architecture, equipment procurement, installation and final acceptance. | We deliver the custom piping solution within it: drawing analysis, a proposed arrangement, integrated prefabrication, CDU liquid cooling piping product integration and on-site assembly support. We are not the overall package provider or a CDU vendor. |
| Piping | Secondary-side distribution lines are commonly engineered by a pipework specialist against the project drawing. | This is our core work. Non-standard supply and return headers, CDU-to-rack runs, rack drops and integrated prefabricated spools in AISI 304 / 316L, plus a proposed solution and on-site assembly. See secondary-side loop piping. |
| Pumps | Selected as part of the CDU or the cooling architecture by the equipment vendor or design team. | We do not manufacture pumps, but we integrate the pump package into the assembly and build the connecting pipework, supports and interfaces around it to the approved dimensions. |
| Cold plates | Rack-level heat exchangers supplied by the IT hardware or thermal vendor. | We do not manufacture cold plates. We build the manifolds and branch lines that feed and return from the rack interface, and integrate their connection hardware to the released drawing. |
| Rack manifold | Often released as a fabricated assembly within the piping package. | Primary product line. Non-standard in-rack and in-row bodies with port count, pitch, orientation and connection type engineered to the drawing. See rack and row manifolds. |
| Liquid cooling manifold | Custom distribution header within the secondary-side piping package. | Primary product line. Built to the released drawing with the joint strategy and internal surface condition agreed before material is committed. See liquid cooling manifolds. |
The CDU is customer-selected equipment supplied by the CDU vendor: we are not a CDU manufacturer and do not build CDU units. What we integrate into the prefabricated piping package is the pipework around it — outlet-flange interfaces, valve groups, bypasses, supports and connection modules — to the approved drawing and BOM. Valves, quick disconnects, hoses, fittings and pumps are likewise customer-selected or purchased parts; we do not manufacture them or present their certifications as our own. Integration, including on-site assembly of the resulting package, is part of our scope.
Where CDU vendors fit, and where our work starts
A coolant distribution unit is the piece of equipment that separates the facility water system from the technology cooling system. Its vendor defines the unit's internal arrangement, its control philosophy and the interface standard at its outlets. None of that is a drawing we produce.
What the CDU vendor does define, for our purposes, is the boundary condition: the flange geometry, the connection standard, the number of supply and return take-offs and the position of those take-offs in the layout. Our drawing analysis reads those from the project package and proposes the piping arrangement around them. CDU liquid cooling piping product integration means we build the customer-selected CDU into the prefabricated piping package through outlet-flange interfaces, valve groups, bypasses, supports and connection modules, so it arrives as a site-ready package rather than a set of loose spools. The CDU unit itself is supplied by its vendor; we are not a CDU vendor and do not manufacture it. That single check also prevents the most expensive scope error in this category — a quote that includes the CDU's internal distribution block, or a spool that terminates at the wrong interface.
Practical rule: if a line is inside the CDU cabinet or upstream of its outlet flange, it belongs to the CDU vendor, not to our fabricated piping. If it starts at that flange and ends at a rack interface, it is a fabrication item we can quote from a released drawing. The CDU unit itself is customer-selected equipment that we integrate into that package — we do not manufacture it.
Pumps and cold plates: adjacent equipment, not our product
These two terms appear in almost every liquid cooling solution search, and neither describes something we make. Pumps circulate coolant and are normally part of the CDU or a separate circulation package. Cold plates sit against the heat-producing hardware inside the rack and belong to the IT or thermal vendor. Both are specified long before a pipework RFQ is issued.
They still matter to us, because they set the interfaces. A pump skid fixes flange sizes, straight-run requirements and support positions. A cold plate fixes the connection type and the branch pitch at the rack. Our manifolds and branch lines are engineered to those dimensions, which is why we ask for the interface data rather than a generic component list. We integrate the pump package and connection hardware into the prefabricated assembly as purchased parts to the approved BOM, and can assemble the resulting package on site.
For a specifier, the useful consequence is simple: you do not need to find a single supplier for pumps, cold plates, the CDU and the piping. You need a drawing that states where each supplier's scope stops. That drawing is what we quote against.
Rack manifolds and liquid cooling manifolds: our primary focus
Of the seven terms above, the two manifold terms describe what YiJia Cool actually fabricates, and they are our primary product line — always as custom, non-standard work. A rack manifold distributes conditioned coolant to branches inside a rack or along a row; a liquid cooling manifold is the broader fabricated header family that includes those bodies, the row headers and the supply and return distribution blocks downstream of the flange.
Neither is a catalogue SKU. Port count, pitch, orientation, body format, connection form, material grade, joint method and the required records are set per project in the released drawing. We return manufacturability questions before material is committed — particularly on multi-port tolerance accumulation and on joint methods that need tool access inside a dense rack — and then fabricate, clean, label and pack the assembly to that revision.
That custom scope is why a drawing is the starting point of every enquiry: we analyse it and propose a fit-for-purpose piping and integration solution, then build and integrate the assemblies and support on-site assembly. We take responsibility for the piping package we deliver, while the cooling architecture and final system acceptance stay with the parties named in the project specification.
How to write an RFQ that separates these scopes
A well-structured request for quotation lets each supplier price its own layer without guessing. The five checks below work for both a turnkey package and a standalone piping package, and they shorten engineering review considerably.
- Name the boundary
Mark the CDU outlet flange on the P&ID and state which lines are in the piping package. - Separate equipment from fabrication
List CDU, pumps and cold plates as customer- or vendor-selected items, with their interface data rather than their supply. - State the revision
Give the drawing revision, isometric or CAD package and the approved BOM that the quote must follow. - Fix the interfaces
Connection form, port count and pitch, interface sizes, coolant chemistry and material grade. - Define the handoff
Required records, labelling, cleaning, packing method, destination and the acceptance protocol agreed with the design team.
With those items in place, our analysis can return a fit-for-purpose custom piping solution and the manufacturability questions before any material is committed. Where the drawing is incomplete, we return the questions needed to shape the solution rather than a price built on assumptions.
Short answers
Do you supply a complete turnkey cooling solution?
We deliver the custom piping and integration solution within a project package — custom non-standard pipework, drawing analysis, a proposed solution, integrated prefabrication, on-site assembly and CDU liquid cooling piping product integration. We are not a CDU vendor and do not manufacture CDU units. The overall package responsibility, equipment procurement and final acceptance stay with the party named in the project specification.
Are you a CDU vendor?
No. We are not a CDU manufacturer and do not build CDU units or their internal components. What we do is CDU liquid cooling piping product integration: we take the CDU you select, supplied by you or your CDU vendor, and build the outlet-flange interfaces, valve groups, bypasses, supports and connection modules that make it part of a site-ready piping assembly. The unit itself is never our product.
Can you work from just a drawing?
Yes. A P&ID or isometric with the loop layout, coolant, flow targets and interface points is enough to start our analysis. We return a proposed piping solution and the questions needed to complete it before any material is committed.
Can you include pumps and cold plates in a quote?
We do not manufacture them, but we integrate them. If the drawing places them in the line, we quote the connecting pipework, supports, manifolds, interfaces and on-site assembly of the integrated package, using their interface dimensions.
Which of these terms is your actual product?
Rack manifolds, liquid cooling manifolds and specification-built stainless loop piping. Those are the items we fabricate to released drawings.
Why put these terms on a page if you do not manufacture the equipment?
Because buyers search the whole solution, not just one component. We are not a CDU vendor and do not manufacture CDU units, pumps or cold plates — but we do integrate the equipment you select into a custom piping package, as CDU liquid cooling piping product integration. Stating the division clearly helps an enquiry reach the right supplier and gives a specifier a vocabulary for writing a clean RFQ.
Which markets do you cover?
Projects in the United States and Malaysia. We fabricate in Foshan, China and ship to the destination agreed in the order; drawings and records are handled in English, and we do not claim local offices or local certification.
What should we send first?
A marked-up P&ID or isometric with the flange boundary, coolant type, flow rates, interface sizes, material grade, quantities, acceptance criteria and packing destination.
Can customer-selected flow components be used?
Yes, when the specified valves, quick disconnects, hoses and fittings are compatible with the approved drawing and BOM. They are purchased parts integrated into the assembly, not manufactured by us.