Specification-built liquid cooling pipework is non-standard stainless secondary-side piping engineered to the dimensions, materials and interfaces of a project drawing rather than selected from a catalogue. It covers the supply and return headers, rack and row manifolds, CDU connection modules, CDU-to-rack runs, integrated prefabricated spools and rack drops downstream of the CDU outlet flange, together with the CDU and purchased flow components integrated to the approved BOM. In data center specifications this circuit is also called the technology cooling system (TCS) loop or the secondary fluid network (SFN). Because the work is custom, the deliverable normally includes drawing analysis, a proposed piping solution and on-site assembly support, not just the fabricated parts.
The boundary matters because a P&ID commonly shows both coolant circuits on a single sheet. Downstream of the flange, coolant sits above live electronics, so coolant chemistry, internal surface condition, joint method and the verification record are reviewed as one decision. The CDU unit itself is customer-selected equipment: we integrate it into the piping package, but we do not manufacture it. The IT equipment and everything upstream of the flange belong to other parties in the project specification. A drawing revision, a BOM and an agreed acceptance protocol are what turn that boundary into a buildable package.
What does CDU liquid cooling piping product integration include?
CDU liquid cooling piping product integration at YiJia Cool means taking the coolant distribution unit selected and supplied by the customer or its CDU vendor, and building it into the custom piping package. The integration work covers five items around the unit: outlet-flange interfaces, valve groups, bypasses, supports and connection modules. We read the flange geometry, connection standard and take-off positions from the vendor's interface data on the project drawing, analyse the loop, and propose the piping arrangement around them, so the assembly arrives as a site-ready package rather than a set of loose spools.
We are not a CDU vendor and do not manufacture CDU units, CDU-internal distribution blocks, pumps, cold plates or CDU controls. The CDU stays customer-selected equipment; our deliverable is the non-standard pipework and the integration work that connects it to the rack interfaces. That distinction is written into the RFQ so a quote never includes the CDU's internal components or presents the vendor's certifications as our own.
The five items we fabricate and fit around a customer-selected CDU
| Integration item | What we build into the piping package | Fixed by |
| Interfaces | Outlet-flange connection pieces and the first supply and return take-offs | CDU vendor flange data on the drawing |
| Valve groups | Isolation and balancing valve assemblies and their connecting spools | P&ID and approved BOM |
| Bypasses | Bypass legs and the spools that tie them into the headers | Loop analysis and the released drawing |
| Supports | Brackets, hangers and fixing points carrying the integrated package | Layout and maintenance envelope |
| Connection modules | Prefabricated modules joining the CDU outlets to the distribution headers | Approved drawing revision |
For a full terminology map, see primary loop vs secondary loop; for our main product line, see rack and row manifolds; for who supplies what, see the liquid cooling solutions supply-scope guide.